2 Heartfelt Creations projects this week :D

Products Used:
HCPC 3600 All Occasion Sentiments PreCut Set
HCDP1 242 Celebrate the Journey Paper Collection
HCPC 3596 Celebrate the Journey Sentiments PreCut Set
HCD 744 Once Upon a Time Die
HCPC 3318 Daisy Patch Flowers PreCut Set
HCD 703 Daisy Patch Die

Project Instructions:
Other Products: Paper mache boxes, vintage photo distress ink, glue, hot glue gun, black memento ink, dew drops,lace, flatback pearl, pearl strings, bandage, organza ribbon, cute little plane charm, ribbon with text.

Journey Box Trio Instructions: This time I have decorated 3 paper mache round boxes. All you need to do is find the paper you like the most from the Celebrate the Journey Collection, cut pieces that match around the boxes and ink the edges. Choose some die cuts and make them match for the lid of the boxes, ink the edges of all the papers you are using. Cut some flowers and leaves from the Daisy Patch Die and ink them also at the edges. I also used several die cuts and used them for the side of the large box. Find some lace and other embellishments you like and decorate to your own needs

Products Used:
HCPC 3600 All Occasion Sentiments PreCut Set
HCDP1 242 Celebrate the Journey Paper Collection
HCPC 3596 Celebrate the Journey Sentiments PreCut Set
HCD 744 Once Upon a Time Die
HCD 745 Luggage and Tags Die
HCPC 3318 Daisy Patch Flowers PreCut Set
HCD 703 Daisy Patch Die
HCPC 3599 Balloon and Bicycle PreCut Set
253839 Decorative Labels Eight

Project Instructions:

Other Products: Aqua and brown card stock (CS), vintage photo distress ink, glue, hot glue gun, black memento ink, scrappersfloss, bandage, foam adhesives, organza ribbon, dewdrops.

Instructions: The card size for this project is 5.9" x 4.7" in aqua cardstock. Ink the edges with vintage photo distress ink. Cut a smaller panel from brown cardstock and ink the edges. Cut a smaller panel using the Celebrate the Journey paper collection, Die cut a panel from aqua CS using Decorative Labels Eight and ink the edges. Die cut some flowers from the Daisy patch die in 2 colors CS and stamp with the Daisy patch flowers precut set and ink the edges. Die cut 2 tags from the Luggage and Tags Die and ink the edges. Stamp the sentiments and use the corresponding die to cut from the Once Upon a Time Die. Adhere them with foam adhesives. Now you can decorate and adhere all the layers and apply to your card.

Heartfelt Creations Wednesday Inspirations :)

My DT card for this week for Heartfelt Creations using the beautiful Celebrate the Journey Collection.

Products Used:

HCPC 3600 All Occasion Sentiments PreCut Set
HCDP1 242 Celebrate the Journey Paper Collection
HCPC 3596 Celebrate the Journey Sentiments PreCut Set
HCD 744 Once Upon a Time Die
HCD 745 Luggage and Tags Die

Project Instructions:
Other Products: “Aqua” and brown card stock (CS), vintage photo distress ink, glue, hot glue gun, black memento ink, scrappersfloss, bandage, crispy lace.

Instructions: The card size for this project is 5.9" x 3.9" in aqua cardstock. Ink the edges with vintage photo distress ink. Cut a smaller panel from brown cardstock, distress the edges and ink the edges. Cut a smaller panel using the Celebrate the Journey paper collection, distress and ink the edges. Cut one of the die cuts from the Celebrate the Journey paper collection and stamp with the happy birthday stamp, and fold 2 corners. Stamp the sentiments and use the corresponding die to cut from the Once Upon a Time Die. Cut 2 other die cut pieces from the paper collection. Ink all the papers again. Now you can adhere all the layers and apply to your card.

Heartfelt Wednesdag again with Celebrate the Journey Collection!

Products Used:
HCD 745 Luggage and Tags Die
HCPC 3597 Luggage and Sentiments PreCut Set
HCDP1 242 Celebrate the Journey Paper Collection
HCPC 3598 World Map PreCut Set

Project Instructions:
Other products: Aqua and brown card stock (CS), vintage photo distress ink, glue, hot glue gun, black Memento ink, ribbon, fasteners, corner embellishments, charm, bandage, crispy lace, chipboard, matchboxes

Instructions: This time I created a drawerbox/easelcard. There is not really a tutorial for it. You can create this in any way you like. I decided to use 2 large matchboxes and glued chipboard on the bottom and the top. That makes the box about 5.1" x 4.3" (13 cm x 11 cm) Before I added the chipboard I inked the edges first as usual :) For the "easel" I used the aqua cs 9.05" x 5.1" (23 cm x 13cm) and scored 2 folding lines at 2.55" and 2.36" (6,5 cm x 6 cm) Before glueing the easel base decorate it first with your favorite paper from the Celebrate the Journey Collection. Ink the edges. Then glue the large part from your easel at the top of your box. Cut a piece of design paper slightly smaller than your base to fit the top of your box. Ink the edges and glue. The suitcase was created with the wonderful Luggage and tags Die. I cut it 2 times, followed the scored lines and glued it so you have a half of a "box". Do this of course with both the dies you cut. From one of the dies I cut off the "belts" otherwise it will not fit nicely if you put both halves together. Of course I inked the suitcase first before adding them together, all I did was use a thin piece of bag paper to hold the bottom of the suitcase together. Then I glued the "belts" to the other half so the suitcase is "closed" do not forget to ink the suitcase first with the Luggage and Sentiments PreCut Set before putting it together. Now you can glue your suitcase at your box so you use it for your easel base to "hold". The sides from the box have also been decorated with the design paper, and so are the inside and outside of the drawers. For the knobs I used fasteners.

To create your card: Cut a piece of aqua cs 5.1" x 4.3" (13 cm x 11 cm) and ink the edges. Yeah I know I sound like an inkaholic. Cut another piece of brown cardstock 4.5" x 3.7" (11,5 cm x 9,5 cm), ink the edges. Cut a piece of design paper slightly smaller than your brown cardstock, ink the edges. Choose one of the nice die cuts from your paper (or the one I used) and ink the edges. Create a tag with the Luggage and tags Die, cut out one of the tags from the dp paper and make it fit to your tag die and ink the edges and finish with some organza ribbon.

Use the Luggage and tags Die for the small ticket and cut out one of the tickets from the dp paper. Now you can glue everything together, before adding your base card to your easel base, make sure you finish and decorate your card first, when finished glue it to your easel base. Decorate with some nice corners and a charm and dew drops et voila, you are

Time is on my side......................:)))

Products Used:
HCPC 3594 Time Sentiments PreCut Set
HCPC 3593 Numeral Clocks PreCut Set
HCD 744 Once Upon a Time Die
HCDP1 241 Once Upon a Time Paper Collection

Project Instructions:
Other Products: Brown and baby blue card stock (CS), vintage photo distress ink, glue, hot glue gun, black memento ink, brown ribbon, crinkle ribbon, 3d foampads, scrappers rope, button.

Instructions: Start with a folded 5.9" x 5.5" size brown card base. Cut a piece of blue cardstock slightly smaller than the base, distress and ink the edges. Cut a piece of brown cardstock slightly smaller than the blue cs, distress and ink the edges. Cut a piece of design paper slightly smaller than the brown cs, distress and ink the edges. Cut a piece of blue cardstock 3.9" x 3.9", distress and ink the edges. Cut a piece of brown cardstock slightly smaller than the blue cs, distress and ink the edges. Cut 3 pieces of design paper and make them fit for your center brown cs, ink the edges. Now you can start by glueing all the parts in a layer. Cut the clocks from the Once Upon A Time Die and use the flourishes one. Ink with Numeral Clocks PreCut Set. Place it in the center of your card with 3d foam pads. Glue the button with rope with the hot glue gun and use one of the clocks for the bottom right. Finish with a cute brown bow and some die cut text from the design paper. For the inside of the card I created a tag also with the clock with flourishes and 3 colors of ribbon.